SOLDER PASTES

 M954 – Standard Paste

• Extremely Good Printability
  (0.4mm pitch, µBGA, 0402)
• Long Stencil Idle Time
• Extremely Long Tack Time
  (greater than 36 hours)
• Fast Print Speed
  (approximately 100 mm/s)

M1000 - Powerful Wetting

• Moderate Bridging Due to Slumping

M600 - Enhanced ICT Testability

• Dispensing Temperature:
  Optimum results will be obtained at a constant temperature between 35-45°C
• Curing Condition:
  120°C over 90 seconds
  130-150°C over 60 seconds
  

• Very high dot profile
• High slump resistivity both after dispensing and during curing
• Excellent dispensability from slow to extremely rapid speeds
  (0.08 s tact time)
• Use JU-41P for Stencil Printing